Taylor Meta-Tec® MS Plus Wood Flooring Adhesive with Meta-Tec®
Technology, is a one component 100% solids, cross linking, MS
polymer-based adhesive formulated for the interior installation of
wood block parquet, engineered wood plank, acrylic impregnated
plank, bamboo and pre-finished and unfinished solid wood flooring.
Taylor MS Plus also has good concrete moisture inhibition
capability as well as good sound reduction property that meets the
IIC and STC building code requirements.
MS Plus is solvent free and isocyanate free, has negligible VOC
content, contains no hazardous chemicals as per OSHA Regulation CFR
1910.1200 and is a nonflammable, low odor adhesive that meets all
federal, state, and local governmental indoor air quality
regulations. This specially formulated adhesive has good early
strength buildup for immediate grab and quickly builds into a
tenacious but elastic resilient bond as the adhesive cross-links.
Taylor Meta-Tec® MS Plus can be used over APA grade underlayment
plywood, association grade particleboard, fully secured cork
underlayments, existing well-bonded vinyl, tile and sheet flooring,
terrazzo, cementitious and anhydrite screeds, concrete, and radiant
heated subfloors where surface temperatures do not exceed
85°F.
| Trowel Recommendations |
|
COVERAGES |
|
All solid wood, engineered wood & bamboo, pre-finished or unfinished, all thickness |
60 - 70
ft² per gal. |
 |
Dry-back wood parquet |
60 - 70
ft² per gal. |
 |
Moisture Inhibitor, Sound Reducer & Wood Installation, One Step Application |
30 - 35
ft² per gal. |
 |
